English
हिन्दीFacilities
Servo Hydraulic Actuation System test rig
Posted On : 29 Dec, 2021Description:
A 3000 psi closed loop hydraulic actuation system test rig has been established in…
0.3 M TUNNEL
Posted On : 12 Oct, 20170.3 m Tunnel
The 0.3m trisonic wind tunnel at NAL was commissioned in 1965 and has been extensively used ever since for various aerospace programs. Compressed air is supplied through the…
0.5 M BASE FLOW TUNNEL
Posted On : 12 Oct, 20170.5 m Base flow Tunnel
0.5 m Base flow facility is one of unique facility in the world which is used to study the afterbody nozzle flow studies. The model support interference on the…
0.55 LOW SPEED WIND TUNNEL
Posted On : 12 Oct, 20170.55 Low speed wind tunnel
The 0.55m Low Speed Wind Tunnel was commissioned in 1970 with a circular cross section test section. The circular test cross section was converted into a…
0.6M TRISONIC WIND TUNNEL
Posted On : 24 Nov, 20170.6m Trisonic Wind Tunnel
Working section
0.6m x 0.6m
Operation
Intermittent blowdown
Mach number range
0.2 to 4.0
Stagnation pressure…
1.2M TRISONIC WIND TUNNEL
Posted On : 24 Nov, 20171.2m Trisonic Wind Tunnel
Working section
1.2m x 1.2m
Operation
Intermittent blowdown
Test duration
40 seconds (typical)
Mach number range…
1.5M LOW SPEED WIND TUNNEL
Posted On : 12 Oct, 20171.5m Low speed wind tunnel
The 1.5m Low speed wind tunnel is one of the very few experimental facilities in the country which is used both for industrial and fundamental research. It is…
3 AXIS CNC VERTICAL MACHINING CENTRE FACILITY
Posted On : 12 Dec, 20173 Axis CNC Vertical Machining Centre Facility
Description
Specification
Specification
Specification
…
3D COORDINATE MEASURING MACHINE INSPECTION FACILITY
Posted On : 12 Dec, 20173D Coordinate Measuring Machine Inspection Facility
3D LAYOUT MARKING & MEASURING MACHINE
Posted On : 23 Jan, 20183D Layout Marking & Measuring machine
The machine enables rapid, easy and accurate marking of components viz moulds, castings etc. Using different accessories available along with the…
3D PRINTING FACILITY
Posted On : 05 Dec, 20173D Printing Facility
Year of Establishment : 2016
Test Application : 3D printing for components & assembly (polymers), Low speed wind tunnel model
Test Features :…
3D Printing Facility
Posted On : 29 Dec, 2021A 3d printing facility has been established for rapid prototyping the Aircraft models and Physical mock-up of Landing Gear Mechanisms.
…
3D WEAVING FACILITY
Posted On : 23 Jan, 20183D weaving facility
Specifications of 3D weaving facilities at NAL
Multibeam Take-up-at-will 3D weaving loom
Working width : 400 mm
Max thickness achievable with…
3D-PROFILOMETER
Posted On : 10 Nov, 20173D-Profilometer
A 3D-profilometer is used to study the surface features such as roughness, topography and flatness. The NanoMap3D contact profiler has both fine and coarse range scans.…
5 AXIS HIGH SPEED CNC MACHINING FACILITY
Posted On : 25 Aug, 20205 Axis High Speed CNC Machining Facility
5 Axis High Speed CNC Machining Center
Description
Specification
Model
Breton Matrix 800
Table…
ACOUSTIC TEST FACLITY
Posted On : 22 Nov, 2017ACOUSTIC TEST FACLITY
Acoustic Test Facility (ATF) was established in the year 1986 and is a national facility for testing satellites and launch vehicle stages & subsystems for the…
ACRYLONITRILE POLYMERIZATION FACILITY
Posted On : 20 Nov, 2017Acrylonitrile polymerization facility
The center has a pilot plant scale CSTR mode polymerization facility for acrylonitrile polymerization. The…
ADAPTIVE ANTENNA FACILITY
Posted On : 29 Nov, 2017Adaptive Antenna Facility
This adaptive antenna facility has been established under National Facility Creation Project of CSIR 11th Five Year Plan. The objective was towards design, simulation…
ADVANCED RHEOMETER EXPANSION SYSTEM (ARES)
Posted On : 28 Dec, 2017Advanced Rheometer Expansion System (ARES)
ARES is a controlled strain/stress rheometer for evaluating viscoelastic properties of materials such as steady shear viscosity, normal force,…
AEROELASTIC TEST FACILITY
Posted On : 05 Dec, 2017Aeroelastic Test Facility
Year of Establishment : 1980
Test Application : Aircraft and launch vehicle
Test Features : Aerodynamic and buffet load estimation
…
AIR PLASMA SPRAY FACILITY
Posted On : 30 Nov, 2017Air Plasma spray facility
Atmospheric plasma spray facility is one of the important and most widely used thermal spray techniques. In atmospheric plasma spray process, ceramic powders…
AIRCRAFT SHEET METAL COMPONENTS FORMING FACILITY
Posted On : 12 Dec, 2017Aircraft Sheet Metal Components Forming Facility
Hydraulic Rubber Pad Press
Description
Specification
Capacity…
ANODIZATION PILOT PLANT FACILITY
Posted On : 30 Nov, 2017Anodization pilot plant facility
Anodization is a simple electrochemical process in which thicker oxide layers (2 to 30 µm) can be obtained on aluminium and its alloys in a suitable…
ATMOSPHERIC ELECTROMAGNETICS AND MODELLING LAB
Posted On : 29 Nov, 2017Atmospheric Electromagnetics and Modelling Lab
This lab is mainly involved in carrying out development of physical schemes for atmospheric models and also to study the effect of various…
ATOMIC FORCE MICROSCOPY (AFM)
Posted On : 10 Nov, 2017Atomic force microscopy (AFM)
Atomic force microscopy is used to measure the nanoscale surface roughness, study the surface morphology, grain size analysis, determination of…
ATTITUDE ESTIMATION FOR LCA
Posted On : 24 Nov, 2017Attitude estimation for LCA
Designed and developed a unique attitude determination algorithm for a high performance fighter aircraft (LCA) using only sensors connected to DFCC. This…
AUTOCLAVES
Posted On : 28 Nov, 2017Autoclaves
Autoclave processing is used for the manufacture of superior quality structural components containing high fibre volume fraction and low void content. The autoclave is a…
AUTOCLAVES FOR CURING OF COMPOSITES
Posted On : 23 Jan, 2018Autoclaves for curing of composites
Specifications:
1. 450mm dia, 500mm length, 200 Deg C, 7 bar – Desk top Autoclave
2. 900mm dia X900mm length - 10 bar, 250 Deg…
AVIONICS INTEGRATION LABORATORY
Posted On : 13 Nov, 2017Avionics Integration Laboratory
The lab used for Systems Engineering activities of the division and concentrated towards the design, development, integration/testing and certification of…
BEARINGS & ROTOR DYNAMICS LABORATORY
Posted On : 23 Nov, 2017Bearings & Rotor Dynamics Laboratory
Bearings & Rotor Dynamics Laboratory of Propulsion Division comprises of National Test Facility for Rolling Element Bearings and Advanced…
BLOCK FORCE MEASUREMENT EQUIPMENT (TF ANALYZER 2000)
Posted On : 21 Nov, 2017Block Force Measurement Equipment (TF Analyzer 2000)
It measures the block force, displacement and hysteresis loop of the multilayered stack.
Photograph of Block Force Unit…
CEM DESIGN CENTRES
Posted On : 29 Nov, 2017CEM Design Centres
This design and simulation centre is equipped with high end workstations and indigenously developed electromagnetic softwares which can solve various electromagnetic…
CHARACTERIZATION FACILITY
Posted On : 20 Nov, 2017Characterization facility
Characterization facility at CCFP is well equipped with analytical instruments required for polymer, fiber and resin analysis. New techniques/analysis method…
CHEMICAL VAPOUR INFILTRATION (CVI) REACTOR
Posted On : 21 Nov, 2017Chemical Vapour Infiltration (CVI) Reactor
CVI Reactor is used to carry out the CVI process, in which the gaseous precursors are transported to the interior of a heated porous preform,…
CLASS 10,000 CLEAN ROOM
Posted On : 10 Nov, 2017Class 10,000 clean room
A 10,000 class clean room facility has been established for the fabrication of micron size devices on different type of wafers. It houses a mask aligner and a…
CLOSED CIRCUIT CENTRIFUGAL COMPRESSOR TEST RIG FACILITY
Posted On : 23 Nov, 2017Closed circuit Centrifugal Compressor Test Rig Facility
FACILITY 1: Closed circuit Centrifugal Compressor Test Rig Facility
The Closed Circuit Centrifugal Compressor Test Rig (…
Cold Spray
Posted On : 11 Nov, 2021The low-pressure cold spray (LPCS) process is a thermal spray process that operates at relatively low pressures (5 bar) and temperatures compared to the other thermal…
COMBUSTION AND GAS DYNAMICS LABORATORY
Posted On : 23 Nov, 2017Combustion and Gas Dynamics Laboratory
Combustion laboratory is involved in the design, development, testing and analysis of gas turbine combustors for small gas turbine engines. In this…
COMPONENT LEVEL STATIC TEST FACILITY
Posted On : 27 Oct, 2021Static strength testing of transport, military aircraft and UAV structural components
Static Strength Evaluation tests of various airframe components to demonstrate compliance…
COMPOSITE REPAIR FACILITY
Posted On : 28 Nov, 2017Composite Repair Facility
The use of composite materials in aerospace industry has risen significantly in recent years. Hence, there is a strong need for repair technologies on primary…
COMPOSITES FABRICATION FACILITY
Posted On : 28 Nov, 2017Composites Fabrication Facility
Objective of the facility :
Development of airworthy composite parts.
Specification of the facility :
Clean Room
A clean…
COMPRESSED AIR FACILITIES
Posted On : 24 Nov, 2017Compressed Air Facilities
Compressed air facility supplies compressed air to all the facilities in CSIR-NAL Belur campus
• Two numbers of 4-stage centrifugal compressors with…
COMPUTER CONTROLLED FABRIC IMPREGNATION MACHINE
Posted On : 23 Jan, 2018Computer Controlled Fabric Impregnation Machine
This Computer Controlled Fabric Impregnation Machine (CCFIM) is a versatile facility, first of its kind in the country, which can handle a…
COMPUTER CONTROLLED VIBRATION QUALIFICATION TEST FACILITY
Posted On : 05 Dec, 2017Computer Controlled Vibration Qualification Test Facility
Year of Establishment : 2000
Test Application : Aircraft subsystems, Automotive and rail systems
Test Features…
CONTACT ANGLE ANALYZER
Posted On : 27 Aug, 2021Contact angle analyzer
The instrument is a fully automated video-based system designed on Goniometric Method with Standard Orthogonal Optics for determination of contact angle and wetting…
CONTROLLED ATMOSPHERE HEAT TREATMENT FURNACE
Posted On : 21 Nov, 2017Controlled Atmosphere Heat Treatment Furnace
The furnace can be used for heat treatment of varieties of materials (metallic and ceramic) up to 1200°C under controlled flow of argon and…
CONVEYOR TYPE MICROWAVE FACILITY FOR COMPOSITE PROCESSING
Posted On : 23 Jan, 2018Conveyor type Microwave facility for composite processing
Specification :
Total Power: 800W x 4 = 3.2 KW
Operating frequency: 2450 MHz.
Applicator:…
COUPON LEVEL STRUCTURAL TESTING FACILITY
Posted On : 28 Nov, 2017Coupon Level Structural Testing Facility
Coupon Level Structural Testing Facility or Materials testing facility is a pre-requisite to any composite development programme as basic…
CREEP TESTING MACHINE
Posted On : 23 Jan, 2018Creep testing machine
Make : M/s. Spranktronics, Bangalore, India.
Application : Creep tests of polymers under tensile mode
Specification :
Load capacity : up to…
DAMAGE TOLERANCE TESTING
Posted On : 28 Nov, 2017Damage Tolerance Testing
Certification demand for damage tolerant design of structures has fuelled the ‘Damage tolerance studies’ on composite structures in the division. Studies in…
DESIGN CENTER
Posted On : 11 Dec, 2017Design Center
A lot of literature are available on how to design a fixed wing aircraft. Most of the tools, like Advanced aircraft analysis, are based on the design theory as described by…
DESIGN SECTION
Posted On : 24 Nov, 2017Design Section
The design section is having domain knowledge in design of high speed wind tunnel models, support systems, strain gauge balances and test rigs. The design team is fully…
DIFFERENTIAL SCANNING CALORIMETER, TA DISCOVERY DSC25
Posted On : 28 Dec, 2017Differential Scanning Calorimeter, TA Discovery DSC25
Differential Scanning Calorimeter is used specifically for the thermal analysis of polymers. Discovery DSC25 can be is …
DIGITAL IMAGE CORRELATION (DIC) MEASUREMENT FACILITY
Posted On : 28 Nov, 2017Digital Image Correlation (DIC) Measurement Facility
Digital Image Correlation (DIC) technique is a non-contact method of measuring surface displacements of an object subjected to a…
DROP TEST FACILITY
Posted On : 05 Dec, 2017Drop test facility
Year of Establishment : 2008
Test Application : Crashworthiness for aerospace and automotive components
Test Features : Full scale vertical drop…
DUAL-CHANNEL CORTEX RTR (RADIO TELEMETRY RECEIVER)
Posted On : 14 Dec, 2017Dual-channel Cortex RTR (Radio Telemetry Receiver)
Description and Specifications: This system is currently tuned to receive signals transmitted from the Saras PT1N aircraft. (The filter…
DYNAMIC MECHANICAL ANALYSER
Posted On : 23 Jan, 2018Dynamic Mechanical Analyser
Make : TA Instruments – India , Division of Waters (India) Pvt. Ltd.
Application : Used for the characterization of bulk properties such as modulus,…
ELECTROCHEMICAL WORK STATION
Posted On : 10 Nov, 2017Electrochemical work station
Corrosion behavior of metals, alloys and coatings can be evaluated using electrochemical workstation by both AC and DC methods. In addition, it can be used…
ELECTROLESS COATING PILOT PLANT FACILITY
Posted On : 30 Nov, 2017Electroless coating pilot plant facility
Electroless nickel plating (EN) is a simple auto-catalytic chemical reduction process for depositing metals, alloys and composites. In this…
ELECTROMAGNETIC MATERIALS APPLICATIONS FACILITY
Posted On : 29 Nov, 2017Electromagnetic Materials Applications Facility
An ISO-certified National facility
State-of-the-art EM characterization measurements of different types of EM materials…
ELECTRON PROBE MICRO ANALYZER (EPMA)
Posted On : 21 Nov, 2017Electron Probe Micro Analyzer (EPMA)
In an EPMA, a micro-volume of a sample is subjected to interaction with a focused electron beam (typical energy = 5-30 keV) and the X-ray photons…
ELECTROSPINNING FACILITY
Posted On : 21 Nov, 2017Electrospinning Facility
Electrospinning is a technique used for preparing polymer and ceramic nanofibers using high viscous polymer solution subjected to high DC electric field. Typical…
EMISSOMETER
Posted On : 10 Nov, 2017Emissometer
Emissometer is a special purpose instrument to measure the emittance of absorber coatings used for the flat plate solar thermal collector, wherein the maximum working…
ENVIRONMENTAL TEST FACILITIES
Posted On : 23 Jan, 2018Environmental test facilities
CSMST is equipped with state-of-the-art environmental test facility, backed by an experienced research group. Environmental tests are an integral…
EXPERIMENTAL MICROWAVE FACILITY (EMF)
Posted On : 29 Nov, 2017Experimental Microwave Facility (EMF)
The EMF facility at CEM, CSIR-NAL was established in 1998 to characterize EM properties of aerospace materials.
Specifications:
…
FIELD EMISSION SCANNING ELECTRON MICROSCOPY INTEGRATED WITH EDS/EBSD
Posted On : 10 Nov, 2017Field Emission Scanning Electron Microscopy Integrated with EDS/EBSD
FESEM is an advanced version of scanning electron microscope which produces 1000 times brighter image than the…
FLUIDIC THRUST VECTORING & COMBUSTION INSTABILITY RESEARCH FACILITY
Posted On : 23 Nov, 2017Fluidic Thrust Vectoring & Combustion Instability Research Facility
F-1 Fluidic Thrust Vectoring Test Facility
Thrust vectoring is an important feature in combat air vehicle…
FORWARD VELOCITY SLED FACILITY
Posted On : 05 Dec, 2017Forward velocity sled facility
Year of Establishment : 2014
Test Application : Aerospace and automotive industry
Test Features : Seat qualification and…
FOURIER TRANSFORM INFRARED SPECTROMETER
Posted On : 10 Nov, 2017Fourier transform infrared spectrometer
FT-IR spectrometer is used to obtain an infrared spectrum of absorption or emission of a solid, liquid or gas.
The…
FOURIER TRANSFORM INFRARED SPECTROMETER BRUKER VECTOR 22
Posted On : 28 Dec, 2017Fourier Transform Infrared spectrometer BRUKER VECTOR 22
Vector 22 is a mid-IR (4000 - 400 cm-1) spectrometer with a full-sized sample compartment and capable of accommodating most…
FREQUENCY SELECTIVE SURFACE (FSS)-BASED FACILITY
Posted On : 29 Nov, 2017Frequency Selective Surface (FSS)-based Facility
This facility is an ISO-certified national facility for FSS design, analysis and simulation, FSS-based hardware development. This…
FULL SCALE FATIGUE TEST (FSFT) FACILITY
Posted On : 27 Oct, 2021Component level and full scale structural testing
Established in 1982
Multichannel (37 Channel)Test Controller System 80 Nos. of Servo hydraulic Actuators for load simulation…
FULL SCALE STRUCTURAL TESTING FACILITY
Posted On : 28 Nov, 2017Full scale Structural Testing facility
Full scale structural tests are essential to qualify the structure for flight. ACD- NAL has state-of-the-art test facility to conduct static and…
GRAPHITE HEATING ELEMENT FURNACE
Posted On : 21 Nov, 2017Graphite Heating Element Furnace
Furnace Details
Application Areas
Model:TE-2936
Manufacturer:M/s Therelek…
GRIT BLASTING FACILITY
Posted On : 10 Nov, 2017Grit blasting facility
Grit blasting is a surface treatment process widely used in industries for diverse purposes like creating roughness, removal of coating / burrs / rust, surface…
GROUND VIBRATION TEST FACILITY
Posted On : 26 Aug, 2020Ground Vibration Test Facility
Year of Establishment: 2002
Test Application: Modal testing of aircraft, aerospace structures and automotive systems
Test Features:…
HDT VSP (HEAT DEFLECTION TEMPERTAURE/ VIGOT SOFENING POINT ) APPARATUS
Posted On : 23 Jan, 2018HDT VSP (Heat Deflection Tempertaure/ Vigot Sofening point ) Apparatus
Make : M/s Saumya Machineries Pvt.Ltd, Ahmedabad, Gujarat
Application : HDT and VSP measurements of…
HEAT TRANSFER LAB
Posted On : 23 Nov, 2017Heat transfer Lab
Film / Effusion Cooling Research Rig Turbine Rim Seal Research Rig Heat Exchangers Test Rig
1. Film / Effusion Cooling Research Rig
The film /…
HEAT TREATMENT FACILITY
Posted On : 12 Dec, 2017Heat Treatment Facility
Drop Down Solutionising Furnace
Sl. No.
Description
Specification
1.…
HIGH RESISTANCE MEASUREMENT SYSTEM
Posted On : 21 Nov, 2017High Resistance Measurement system
It measures the resistance and resistivity of ceramic samples
Photograph of High resistance meter…
HIGH SPEED ALTERNATOR TEST FACILITY
Posted On : 26 Aug, 2020High Speed Alternator Test Facility
Technology demonstration of a high speed alternator was done successfully for 4.5 kW Power at 30000 rpm for a small gas turbine engine. Alternator and…
HIGH SPEED COMBUSTOR TEST FACILITY
Posted On : 23 Nov, 2017High Speed Combustor Test Facility
High Speed Combustor Test Facility (HSCTF) is first of its kind in India and a state-of-the-art facility for advanced combustor development. The major…
HIGH TEMPERATURE GAS JET EROSION TESTER
Posted On : 10 Nov, 2017High Temperature Gas Jet Erosion Tester
The erosion tester is used to study the erosion resistance of surfaces when high pressure air jet of erodent particles is impinged at certain…
HIGH TEMPERATURE TRIBOMETER
Posted On : 21 Nov, 2017High Temperature Tribometer
Equipment details
Applications
Model:THT S/N 10-700
Manufacturer:CSM…
HIGH TEMPERATURE UNIVERSAL TESTING MACHINE
Posted On : 21 Nov, 2017High Temperature Universal Testing Machine
Universal testing machine is capable of tension/compression/flexural testing metallic and ceramic materials under load, strain and position…
HIGH VELOCITY AIR GUN IMPACT TEST FACILITY
Posted On : 05 Dec, 2017High Velocity Air gun impact test facility
Year of Establishment : 2010
Test Application : High velocity impact study for aerospace components
Test Features :…
HUMIDITY CHAMBER
Posted On : 28 Nov, 2017Humidity Chamber
The Advanced Composites Division (ACD) is equipped with state-of-the-art environmental test facility. This test facility is an independent part of the developmental and…
IMPEDANCE ANALYZER
Posted On : 21 Nov, 2017Impedance Analyzer
Impedance Analyzer measures Capacitance/Dielectric Constant, Inductance, Resistance, Impedance, Dissipation factor, Quality factor etc of samples in the frequency range…
IN-FLIGHT VIBRATION MEASUREMENT AND FLUTTER TEST FACILITY
Posted On : 05 Dec, 2017In-flight vibration Measurement and Flutter Test Facility
Year of Establishment : 2007
Test Application : Aircraft
Test Features : In-flight vibration measurement and…
KEITHLEY ELECTRICAL CONDUCTIVITY METERS WITH 6517B ELECTROMETER ( FOR HIGH RESISTIVITY MEASUREMENTS)
Posted On : 28 Dec, 2017Keithley Electrical Conductivity Meters with 6517B Electrometer ( for High resistivity measurements)
Volume Resistivity or Surface Resistivity of polymers, FRP composites, films and…
LAB SCALE RESIN IMPREGNATION MACHINE (M/S. TECHNOLOGY SPECIALISTS LTD., WARWICK U.K)
Posted On : 28 Dec, 2017Lab scale Resin Impregnation Machine (M/s. Technology Specialists Ltd., Warwick U.K)
This machine is customised for producing Room temperature/High temperture thermoset prepregs …
LARGE SCALE ROTATING RIG
Posted On : 23 Nov, 2017LARGE SCALE ROTATING RIG
The Large Scale Rotating Rig (LSRR) is a low speed, open circuit, suck-down type of facility. It is a specially designed experimental rig to carryout basic…
LASER MICROMACHINING FACILITY FOR CERAMIC SUBSTRATES
Posted On : 05 Feb, 2020Laser Micromachining Facility for Ceramic Substrates
In recent years, there is a growing demand for laser micromachining of structural and electronic ceramics for different applications…
LASER TRACKER INSPECTION FACILITY
Posted On : 12 Dec, 2017Laser Tracker Inspection Facility
Leica Laser Tracker
Range : 80m ,Software : Metrolog
Potential Use of the Facility:
Jig setting, Inspection and…
MAGNETRON SPUTTERING FACILITY
Posted On : 30 Nov, 2017Magnetron sputtering facility
Sputtering is a versatile physical vapor deposition process to fabricate a variety of metallic, oxide, nitride and carbide coatings. At SED, different types…
MATERIAL EVALUATION TESTING
Posted On : 05 Dec, 2017Material Evaluation testing
Year of Establishment :
Test Application : testing and evaluation of mechanical properties of materials at temperatures ranging from -400 0C to…
MAV AIRFRAME FABRICATION FACILITY
Posted On : 23 Jan, 2018MAV Airframe Fabrication Facility
Light weight airframes of various sizes in the range of 300mm to 1800mm can be fabricated in this facility. Stringent Quality Control norms are adhered…
MERCURY POROSIMETRY ANALYZER
Posted On : 21 Nov, 2017Mercury Porosimetry Analyzer
This analytical technique involves the intrusion of Mercury at high pressure into a material through the use of a penetrometer. The pore size (r) is…
MICRO HARDNESS TESTER
Posted On : 21 Nov, 2017Micro Hardness Tester
This digitally controlled microhardness tester has dual indenters (Vickers and Knoop) with test load range of 0.01 to 2.0 kgf
…
MICRO RAMAN SPECTROMETER
Posted On : 10 Nov, 2017Micro Raman spectrometer
Raman spectroscopy is a simple spectroscopic technique used for chemical phase identification of solid and liquid samples. Micro-Raman spectrometer is used to…
MICRO-SCRATCH REVETEST TESTER
Posted On : 21 Nov, 2017Micro-scratch Revetest tester
Equipment details
Applications
Model: RST 27-504
Manufacturer:CSM…
MICROELECTRONICS SYSTEM LABORATORY
Posted On : 13 Nov, 2017Microelectronics System Laboratory
Microelectronics Systems Laboratory (MSL) used for Electronics Systems Design, Development and Testing from MAV/UAV as well as for Aircraft. MSL…
MICROWAVE ANECHOIC CHAMBER (NAL-MAC)
Posted On : 29 Nov, 2017Microwave Anechoic Chamber (NAL-MAC)
The microwave anechoic chamber (NAL-MAC) was established and certified at CEM, CSIR-NAL in 2002. This facility was established to support radome…
MODEL SHOP
Posted On : 12 Oct, 2017Model shop
EAD Model shop is a special purpose work shop for the fabrication of light weight high strength wind tunnel models and prototypes. The wind tunnel models as well the porotypes…
MOTION CAPTURE LABORATORY
Posted On : 13 Nov, 2017Motion Capture Laboratory
The NALMAC uses a commercial indoor motion capture system both as the source of indoor positioning information for autonomous flight and as a high accuracy…
MULTI AGENT COOPERATIVE CONTROL PROCESSOR-IN-THE LOOP (PIL) FACILITY
Posted On : 24 Nov, 2017Multi agent Cooperative Control Processor-in-the Loop (PIL) Facility
Established the formation flying Processor -in-the Loop (PIL) to test formation flying of multiple MAVs in…
NANOINDENTATION HARDNESS TESTER
Posted On : 10 Nov, 2017Nanoindentation hardness tester
Nanoindentation hardness tester is used to evaluate the mechanical properties such as hardness, elastic modulus, and fracture toughness of thin coatings.…
NANOSCRATCH TESTER / TRIBOMETER
Posted On : 10 Nov, 2017Nanoscratch tester / Tribometer
Nanoscratch tester/Tribometer is used to carry out scratch test for testing adhesive strength of a coating and wear test to measure tribological…
NAVSTREAM SHARPE XR6 DIFFERENTIAL GLOBAL POSITIONING SYSTEM
Posted On : 14 Dec, 2017Navstream Sharpe XR6 Differential Global Positioning System
Description and Specifications: This system is at Telemetry (ASTE) and is used during taxi trials for recording the position…
NON-DESTRUCTIVE EVALUATION & TESTING
Posted On : 28 Nov, 2017Non-destructive Evaluation & Testing
Non-destructive Evaluation is the most critical activity in any composite development programme and its importance in aerospace activities is all…
OPTICAL MICROSCOPE (INVERTED)
Posted On : 21 Nov, 2017Optical Microscope (Inverted)
Reflected light from the polished, and polished and etched surfaces of metallographically prepared samples is used to form the image for studying the…
PARTICLE SIZE ANALYZER
Posted On : 10 Nov, 2017Particle size analyzer
The instrument is used for determining the particle size distribution and average agglomerated particle size of powder samples. The analysis is based on laser…
PIEZOMETER
Posted On : 21 Nov, 2017Piezometer
The equipment measures piezoelectric charge coefficient (d33, d31), capacitance and loss factor of pieozo electric materials at room temperature.
…
POLYMER LABORATORY
Posted On : 28 Nov, 2017Polymer Laboratory
A Polymer Laboratory has been set up for conducting research work on materials and processing, incoming inspection of composite materials (e.g. resins, adhesives and…
PRECISION COMPOSITE SPECIMEN CUTTING MACHINE
Posted On : 28 Nov, 2017Precision composite specimen cutting machine
Coupon testing is a very important aspect of new material/process development which will finally lead to derivation of design allowables. The…
PREPREG CUTTING MACHINE (LECTRA INC.)
Posted On : 28 Nov, 2017Prepreg Cutting Machine (Lectra Inc.)
Facility Name: Fully automated tape cutting NC machine
For composite fabrication it is required to cut the prepregs, carbon fabrics etc.…
PROTOTYPE PCB ETCHING MACHINE FACILITY
Posted On : 29 Nov, 2017Prototype PCB Etching Machine Facility
The prototype PCB etching machine was installed and commissioned at CEM, CSIR-NAL in 2017. The specifications and capabilities of the facility are…
PU FOAM DISPENSING MACHINE
Posted On : 23 Jan, 2018PU Foam Dispensing machine
Low pressure foaming machine for applications in expanded polyurethane. It meters 2 components polyol & Iso via positive displacement pumps with gears,…
RF AND DC DUAL CHAMBER MAGNETRON SPUTTERING SYSTEM
Posted On : 21 Nov, 2017RF and DC Dual Chamber Magnetron Sputtering System
RF and DC magnetron sputtering system deposits source (target) material on a substrate by ejecting neutral atoms from the target…
ROBOTIC TUFTING AND Z-PINNING
Posted On : 28 Nov, 2017Robotic Tufting and Z-Pinning
Composites are the materials of choice for aerospace applications due to their excellent mechanical and other properties. However due to their laminar…
ROTARY ENGINES AND CERAMICS APPLICATION LABORATORY (RECAL)
Posted On : 23 Nov, 2017Rotary Engines and Ceramics Application Laboratory (RECAL)
RECAL is associated with the design, development and testing of power plants for Unmanned Aerial Vehicles (UAVs). This…
SALT SPRAY CHAMBER
Posted On : 10 Nov, 2017Salt spray chamber
Continuous salt spray or salt fog test is a standard test method and also an industrial practice used to evaluate the corrosion resistance of various bulk materials…
SCANNING ELECTRON MICROSCOPE (SEM)
Posted On : 21 Nov, 2017Scanning Electron Microscope (SEM)
Image formation in an SEM is accomplished through collection of the secondary electrons / back scattered electrons generated due to interaction of an…
Six Degrees of Freedom motion platform
Posted On : 07 Jan, 2022Six Degrees of Freedom motion platform
Description:
This is an electrically…
SIX DOF MOTION PLATFORM TEST FACILITY
Posted On : 05 Dec, 2017Six DOF Motion Platform test facility
Year of Establishment : 2017
Test Application : Aircraft and automotive Fuel tank slosh simulation
Test Features : Six…
SMALL GAS TURBINE ENGINE TEST (GET) FACILITY
Posted On : 23 Nov, 2017Small Gas Turbine Engine Test (GET) Facility
Small Gas Turbine Engine Test (GET) Facility has been developed for testing small gas turbine engine producing thrust upto 500 kgf. It…
SMART MATERIAL TESTING FACILITY
Posted On : 23 Jan, 2018Smart material testing facility
Specification:
Make: Bose Corporation, USA
Features:
Computer controlled dynamic testing of materials Infrared thermal imaging…
SOFC TEST STATION
Posted On : 10 Nov, 2017SOFC test station
SED division has a 120 V and 600 W fuel cell work station, which is capable of testing different types of fuel cells such as SOFC, PEM etc. in planar and tubular…
SOLAR SPECTRUM REFLECTOMETER
Posted On : 10 Nov, 2017Solar spectrum reflectometer
In solar spectrum reflectometer, the source of illumination is a tungsten-halogen lamp. The radiation reflected by the sample is measured at an angle of 20º…
STATIC AND DYNAMIC FULL FIELD NON-CONTACT STRAIN MEASUREMENT USING 3D DIGITAL IMAGE CORRELATION SYSTEM
Posted On : 05 Dec, 2017Static and Dynamic Full Field Non-contact Strain Measurement using 3D Digital Image Correlation System
Year of Establishment : 2014
Test Application : Full-scale aerospace…
STRUCTURAL DESIGN AND ANALYSIS
Posted On : 27 Nov, 2017Structural Design and Analysis
This division has adequate expertise in the Conceptualization, Design, Detail Design, Finite element analysis and FE based optimization of composite/metal…
STRUCTURAL HEALTH MONITORING LAB
Posted On : 28 Nov, 2017Structural Health Monitoring Lab
Structural Health Monitoring Laboratory is the state of art for facility of Advanced Composites Division for the development of Fiber Optic based…
SUB-COMPONENT FATIGUE TEST FACILITY
Posted On : 27 Oct, 2021Fatigue and Damage tolerance tests of
transport & military aircraft structural components
Fatigue tests of various…
SYSTEM WORTHINESS INTEGRATION AND FLIGHT TESTING
Posted On : 11 Dec, 2017System Worthiness Integration and Flight Testing
System Worthiness Integration and Flight Testing formed to support the UAV development in NAL. SWIFT plays an important role in…
TAPE CASTING AND MULTI LAYERED FABRICATION EQUIPMENTS
Posted On : 21 Nov, 2017Tape Casting and Multi Layered Fabrication Equipments
Tape Casting and other equipments such as Scree Printer, Stacker and Dryer, Isostatic Laminator and Precision Cutter are used for…
THERMAL CONDUCTIVITY METER [HOT DISK-THERMAL CONSTANTS ANALYSER TPS 2500S]
Posted On : 28 Dec, 2017hermal Conductivity Meter [Hot Disk-Thermal Constants Analyser TPS 2500S]
This equipment is measures the thermal conductivity (Tc), thermal diffusivity (Td) and specific heat capacity (…
THERMAL CYCLING FURNACE
Posted On : 10 Nov, 2017Thermal cycling furnace
A thermal cycling furnace is used to predict the life of thermal barrier coatings. It can also be used to estimate the high temperature oxidation resistance of…
THERMO GRAVIMETRIC ANALYZER
Posted On : 10 Nov, 2017Thermo gravimetric analyzer
Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the…
THERMO-PHYSICAL CHARACTERIZATION OF SOLID MATERIALS.
Posted On : 22 Nov, 2017Thermo-Physical Characterization of solid materials.
The Coefficient of thermal expansion (CTE) is an essential property to be measured for knowing the material behaviour as a function…
THERMOGRAVIMETRIC ANALYZERS, TA DISCOVERY TGA550
Posted On : 28 Dec, 2017Thermogravimetric Analyzers, TA Discovery TGA550
Thermogravimetric analyzers measure changes in mass or weight in response to increases in temperature or time. These kinds of…
THIN FILM (TF) ANALYZER
Posted On : 21 Nov, 2017Thin Film (TF) Analyzer
TF analyzer measures electromechanical properties of piezoelectric thin films by applying an electrical excitation signal to the sample and measuring mechanical…
THIN FILM X-RAY DIFFRACTOMETER
Posted On : 10 Nov, 2017Thin Film X-ray Diffractometer
X-ray diffraction (XRD) is a simple non-destructive technique used to obtain detailed information about the crystallographic structure of materials. …
TOOL DESIGN FACILITY
Posted On : 28 Nov, 2017Tool Design Facility
Objective of the facility :
To fabricate composite tools using wet layup technique / prepreg technique required for both development and production programs…
TRACKING ANTENNA SYSTEM (FROM ORBIT, ISRAEL)
Posted On : 14 Dec, 2017Tracking Antenna System (from Orbit, Israel)
Model Number: AL-4018-1DNAL-SYS
Description and Specifications: This is a 2 metre diameter L or S band antenna. The parabolic dish is…
TRANSONIC AXIAL FLOW COMPRESSOR RESEARCH FACILITY [AFCR]
Posted On : 23 Nov, 2017Transonic Axial Flow Compressor Research Facility [AFCR]
The Axial Flow Compressor Research Rig has been established for undertaking performance evaluation and parametric studies on…
TRANSONIC CASCADE TUNNEL
Posted On : 23 Nov, 2017Transonic Cascade Tunnel
The Transonic Cascade Tunnel (TCT) facility located at NAL wind tunnel centre (NWTC) is an indigenously designed, unique wind tunnel facility to carry out…
UNIVERSAL HARDNESS TESTER
Posted On : 21 Nov, 2017Universal Hardness Tester
The hardness tester works on the principle of indentation. The material is subjected to a predetermined force through an indenter. The dimension of the…
UNIVERSAL TESTING MACHINE
Posted On : 23 Jan, 2018Universal Testing Machine
Specifications:
Make: INSTRON, USA
Capacity: 100 kN
Major clients of this facility: HAL, ADA, Naptha Resins Ltd.
UV-VIS-NIR SPECTROPHOTOMETER
Posted On : 10 Nov, 2017UV-VIS-NIR spectrophotometer
It can be used for studying the reflection and absorption measurements on solid samples, including semiconductors, films, glass, and absorbing materials…
VACUUM FURNACE
Posted On : 10 Nov, 2017Vacuum furnace
It can be used up to 2000°C for sintering various non-oxide ceramics. The furnace has the capability to maintain 10-3 mbar vacuum. It can also operate in various…
VERSATILE TURBINE TEST RIG (VTTR)
Posted On : 23 Nov, 2017Versatile Turbine Test Rig (VTTR)
Specifications of the VTTR facility
Max air mass flow : 9 kg/sec Max turbine inlet Pressure : 10 kg/cm2 Max inlet …
VIBRATING SAMPLE MAGNETOMETER
Posted On : 10 Nov, 2017Vibrating sample magnetometer
Vibrating sample magnetometer (VSM) is an instrument for magnetic properties measurement and is equipped with cryogenic facility. It allows the…
VIBRO-ACOUSTIC TEST FACILITY
Posted On : 05 Dec, 2017Vibro-acoustic Test Facility
Year of Establishment : 2014
Test Application : Aircraft and automotive panels,
Test Features : sound absorption and transmission…
WATER JET CUTTER
Posted On : 28 Nov, 2017Water jet cutter
Capability: cutting is a facility that is imperative in any composite development programme due to tight tolerances and accuracies in dimensions that can be achieved…
WEAR TESTER
Posted On : 10 Nov, 2017Wear tester
Pin on disc wear and friction tester is used to study the tribological properties like wear and friction behavior of materials/coatings in sliding contact. Sliding occurs…
WIND TURBINE GENERATOR TEST FACILITY
Posted On : 23 Jan, 2018Wind Turbine Generator Test Facility
The performance of a generator (both Permanent Magnet and Alternator type) under different load conditions can be experimentally evaluatedin this…
WOOD PECKER NDE
Posted On : 23 Jan, 2018Wood Pecker NDE
Specifications:
Make: Mitsui Engg., Japan
Techniques applied in this facility: Automated tap testing technique
Major clients of this facility: NAL…
X-RAY DIFFRACTOMETER
Posted On : 21 Nov, 2017X-ray Diffractometer
X-ray Diffraction (XRD) is a high-tech, non-destructive technique ( NDT) for analyzing a wide range of materials, including fluids, metals, minerals, polymers,…
X-RAY PHOTOELECTRON SPECTROMETER
Posted On : 10 Nov, 2017X-ray Photoelectron Spectrometer
X-ray photoelectron spectroscopy (XPS) is associated with the analysis of the energy of electrons present in the atoms, molecules and compounds.…
Last updated on : 24-08-2018 09:25:53am