Microelectronics System Laboratory
Microelectronics Systems Laboratory (MSL) used for Electronics Systems Design, Development and Testing from MAV/UAV as well as for Aircraft. MSL equipped with design facilities and equipment that are used in the design flow from Requirements to Documentation for any system.
Specifications:
Trinocular PCB Inspection
- 40 to 160x Magnification
- 20x Wide-Angle Eyepiece
- Max Specimen Height: approx 120mm
- Lighting: 12V 10W halogen bulb
- Eye Sepration Adjustment: 57-75 mm
- PC Interface
RF Analysis
- Frequency: 1MHz - 13,6 GHz
- Handheld
- RBW : 10Hz - 3 MHz (1-3-10 Sequence)
- VBW : 1Hz - 3 MHz (1-3-10 Sequence)
- DANL: +10 dBm (1 to 500 MHz)
- DANL : +20 dBm (500 MHz to 13.6 GHz)
- Connector and impedance: Type-N female, 50 Ω
High BW Signal Analysis
- 4 Channel Mixed Signal Oscillscope
- 4 GSa /s Real Time, Low Noise Flash A /D Converter
- Time and Frequency Domain Analysis
- Real-Time FFT (dBm, dBV, Vrms), up to 64 kPts
- Trigerring (Auto, Normal, Single)
- Serial Bus Trigger and Hardware accelerated Decode
including List View. Options: I2C + SPI + UART/RS-232 (HOO10/HOO11), CAN + LIN (HOO12) - Automatic Search for user-defined Events
- Pass/Fail Test based on Masks
Digital Protocol Analysis
- Length & Width: 3.12 inch (79.2mm)
- Input voltage range: -0.9V to 6V
- Available Sampling Rates: 250 kHz to 100 MHz
- Sample Depth : Upto 10B Samples
- Pulse-width measurement: +/- 10ns @ 100MHz, +/- 20ns @ 50MHz, +/- 40ns @ 25MHz, +/- 80ns @ 12.5MHz
- Max Input Bandwidt : 25MHz square wave
GCS Integration and Test
- Integration and Testing in Lab
- Easy Modification and Implementation
- Quick Parameter Tuning
- RC and Communication Checking
- Open Source and Custom GCS
Pressure Chamber Calibration Bench
- Range: 0 to 15000 ft
- Rate of Climb : 1000 ft/min
- Input: 1013.25 mbar to 571.8 mbar
- Custom Build Pressure chamber
- Useful for Sensor Calibration used in MAVs
- Data Logger and Anlaysis software
- Small in footprint
Close Field Analysis
- Different Frequency Band Near Field Probe Set
- Electric and Magnetic Field Measurement
- Spectrum Analyzer Interface
- Hardware Level Checking for Interference
Other facilities are listed below:
- Sensor Integration and Test Station
- Autopilot Development Station
- RC Communication Test Station
- Digital Rework Station
- Engineering Tool Kits Station
- Flight Control Test Station
- Thermal Measurements Station
Techniques applied in this facility
Major clients of this facility: Internal design and development